Pro Tips and Tricks for Installing a New Shower Unit

Pro Tips and Tricks for Installing a New Shower Unit

Blog Article

Call Today

What're your opinions about How to Install a Shower Enclosure ?

A successful shower installation calls for cautious preparation and also a lot of job. In most cases, you will certainly require to do three types of tasks: framing wall surfaces, installing the plumbing, as well as finishing wall surfaces.

Prep work

Firstly, you need to decide on the kind of shower that you desire to set up. It is important to identify whether the chosen shower is capable of handling particular systems and can control a secure degree of water with the central heating boiler. The majority of shower units nowadays are developed to be versatile to different water pressures (such as saved hot water and also chilly keys).
It is additionally vital to take into consideration the water stress as well as the planning of the piping and drainage for the shower

Different Types of Shower Units

Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower system can be attached to the bathroom tap according to your need, and also the water temperature can be changed through the faucets. Push-on mixers are cheap and also extremely straightforward to mount. However, although the tube link is easy, it is easily displaced. Additionally, it is inconvenient to adjust the temperature.

Bath/Shower Mixer: The tube and spray of this type of shower are incorporated with a bath mixer faucet, as well as the temperature can be adjusted via the bath taps. It is a very economical choice and no added plumbing is involved. However, the bath/shower mixers additionally struggle with troublesome temperature control alternatives.

Guidebook Mixer: The pipe as well as spray of a hands-on mixer shower system are a part of the wall surface system and the hot and cold water materials are connected to a solitary shutoff The temperature and also pressure of the water are regulated through either one or a range of knobs (in much more expensive showers). Although temperature control is a lot easier in manual mixer kinds, they are a lot more pricey than the formerly discussed mixers. They additionally call for additional plumbing of cold and hot water supply pipelines.

Thermostatic Mixer: The hose pipe as well as spray of this shower type are a part of the wall surface unit and the cold and hot water materials are connected to a solitary valve below as well. It is full with a built-in stabiliser to self-adjust the water temperature level as well as to stop it from becoming also hot. One of the greatest advantages of a thermostatic mixer shower type consists of practical temperature control. Nevertheless, it is the most expensive of the different mixer alternatives.

Power Shower: A power shower is a solitary device containing a powerful electric pump that is capable of altering both the water pressure and temperature level. This kind of shower can be fitted if there is supply of water from a cold water tank and a warm water cyndrical tube. A power shower makes the adjustment of both pressure as well as temperature very easy. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is supplied by a mix central heating boiler under mains pressure.

Electric Shower: An electrical shower is plumbed into a keys cold water supply and it heats the water electrically. It is essential to keep in mind that for this shower kind to be mounted, the mains pressure requires to be at the very least 0.7 kg/sq cm (10lb/sq in). The system permits the temperature level as well as stress to be changed via a knob. Models with temperature level stabilisers are better as they continue to be unaffected by other faucets elsewhere being used within the household. A major downside of electrical showers is that the control knob only allows for the option of heats at much less pressure, or lower temperature levels at a greater pressure. This is problematic in the winter season when the spray is typically weak as well as the keys water is cooler. However, this issue is dealt with in some versions which are offered with a winter/summer setting.

Approach

Depending upon the sort of shower you desire to mount, the shower head have to either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it must have a check valve.
Before starting, it is a good idea to mark the positions of the shower head and also control, and also to plan the pipe-work involved. In addition, the drain system to eliminate the drainage will require to be planned. Both positions of the cable course and also the shower button will certainly additionally need to be considered if an instantaneous or electrical shower unit is being installed.
Make use of the guideline guide given with the shower device to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is necessary to remove the supply of water. In order to shield the pipelines, they ought to be provided a water resistant covering as well as likewise fitted with separating shutoffs. The pipes can after that be hidden right into the wall surface and plastered over to neaten the total appearance.
Fit the base tray, shower head, and installations.
Connect the major shower control to the pipelines that will certainly be supplying the water (This might call for a female screw thread adapter).
Reconnect the water supply and test the pipelines for any kind of leakages, as some might require firm.
If you are installing an electrical shower, bear in mind to switch off the power supply prior to making any kind of electric links. Once these links have actually been made (there need to be advice within the user's manual), the power supply can be switched back on.

Adjusting Water Stress to Fit Your Shower

The cold water storage tank can be raised to a better height (sometimes as low as 150mm (6inches)) by fitting a solid wooden support beneath it - perhaps made up of struts and blockboards. If you choose this choice, the major as well as distribution pipes will also have to be increased to satisfy the brand-new elevation of the storage tank.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it has to be linked into the power supply in order to run.

Piping as well as Drainage

It is best to make use of 15mm diameter supply pipes, and make the runs to the shower as short and also straight as feasible so as to keep maximum pressure and minimise warmth loss. Additionally, by minimising using elbow joints for pipe edges, you can decrease the resistance in the flow of the water supply. You can achieve this by bending the pipelines instead.

A Lot Of Usual Errors

Breaching or neglecting local code restrictions.

Making use of pipes that are too tiny.

Affixing copper to galvanized without making use of a brass or dielectric suitable in between both.

Not using tape or pipe compound at threaded joints.

Not leveling your components when mounting them.

Not mounting an air space filling for fixtures.

Cutting supply stub outs too short to set up the shutoff valves onto after the finished wall surface remains in place.

Not appropriately straightening tubes right into installations or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will trigger a leakage.).

When transforming the water back on in your house, always run the outside hose shutoff or flush your toilets to hemorrhage dust as well as air from the lines. This particles can trigger problems in your sink taps and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a keen reader on How to Install a One-Piece Shower Unit, I assumed sharing that editorial was really useful. Sharing is nice. One never knows, you may just be helping someone out. Bless you for your time. Please visit our website back soon.

Need Help? Hire Us Now!

Report this page